Shower Partitions
Shower Partitions
Transform Your World with Space Makeover
[ Shower Partitions — Redefining Reflections in Style ]
Premium Glass Shower Partitions for Modern Bathrooms
Space Makeover designs and manufactures glass shower partitions for villas, apartments, and commercial properties. Our company has been operating in Dubai and Ajman, as well as the entire UAE. Whether you need a glass shower partition in Dubai to help you make your small bathroom appear more spacious, replace a damaged shower curtain, or complete a complete bathroom makeover, our team will take care of everything for you- starting from taking measurements all the way through finishing the installation.
All of the shower enclosures we use are produced from tempered safety glass, sealed with waterproof silicone, and equipped with marine-grade stainless steel equipment meant for the humid and mineral-rich water conditions of the UAE. Whether you require a shower enclosure without a frame for the master bathroom in a villa or a practical sliding door for the bathroom in a small flat, we customize each shower enclosure for your space instead of opting for standard sizes.
Our Shower Partition Services
Frameless Shower Partitions
Frameless bathroom shutters are widely used across villas and high-end apartments in Dubai and Ajman. They are made of 10mm or 12mm tempered glass for durability and safety. The panels use hidden hinges without any visible frame. As the glass panels are not obstructed by frames, better lighting can be achieved, and cleaning hassle is reduced as well.
Semi-Frameless Shower Partitions
Using slim metal framing or a support bar connected to the fixed part makes the construction frameless like a modern shower partition while saving money. This design can be used for average-sized bathrooms in Dubai and Ajman apartments.
Framed Shower Partitions
The edges of the glass are enclosed in an aluminum or stainless steel frame that increases their durability. They are a smart and inexpensive solution when it comes to rental apartments, dormitories, and commercial bathrooms. This type of frame is a good compromise in terms of price, durability, and look.
Sliding Shower Doors
Sliding doors operate along an overhead track rather than swinging to the side. They are ideal for small and awkward bathrooms where swinging doors would either hit the sink or the wall; therefore, sliding doors are commonly found in small bathrooms in various apartments in Dubai and Ajman.
Pivot & Hinged Shower Doors
A door that swings open on one or two hinges, giving the cleanest sightline of any door type. Pairs well with a frameless fixed panel. Needs clearance space to open, so we check this during your site survey.
Walk-In Shower Screens
A single large fixed glass panel with no door at all, left open on one side. A popular choice for minimalist wet-room designs and larger villa bathrooms where an open, spa-like feel is the goal.
Corner & Quadrant Enclosures
For showers positioned in a corner, we fit two-panel corner partitions or curved quadrant enclosures that make the most of tight floor space while fully containing water.
Bathtub Glass Screens
A single fixed or pivoting glass panel fitted directly onto a bathtub, for apartments and villas where the bathroom was built with a tub rather than a separate shower stall.
We specifically use toughened safety glass in all our shower glass products. This is because the heat treatment causes it to break into small round pieces rather than sharp-edge pieces. Therefore, it passes the relevant standard for humid areas in residential or commercial buildings in the UAE.
Choosing the Right Glass Thickness
The larger and taller the panel, the thicker the glass needs to be to stand rigidly on minimal hardware. We never quote thickness without measurements, since getting this right protects both the durability of the panel and your budget.
What Makes Our Shower Partitions Special
Designed to open up your space
Our glass partitions seem to create the illusion of clearer areas in bathrooms that give a feeling of airiness and bigger spaces. The natural light is able to pass through all the time and creates a peaceful spa atmosphere.
Strong, safe, and built for the UAE climate
We are using tempered glass and marine-grade stainless steel fittings (SS304/SS316) that are not influenced by salty air and wet weather as easily as other chrome-plated materials. Each panel is also sealed with waterproof silicone to eliminate any possible leakage.
Custom-made for your bathroom
Whether residential or commercial, we provide every shower partition tailored to fit the size, layout, and design of the bathroom, whether it’s a massive villa en-suite, a compact apartment bathroom, or an unusual corner shower.
Low maintenance, easy to clean
A swift squeegee wipe following your shower and a gentle cleaning with detergent is more than sufficient to keep your glass partitions in good condition.
Our Installation Process
We always have a pre-defined 6-step approach for each shower partition, from our initial site visit through to final handover. This ensures accurate measurements, helps eliminate delays, and allows you to have a clear understanding of what to anticipate at each step.
Free consultation and site survey
A technician visits your property or reviews photos and measurements, and makes a preliminary estimate of shower opening, wall alignment, and the shower’s drainage.
Design and material selection
Designs are available as framed, semi-framed, or frameless; glass finishes are available as clear, frosted, tinted, or textured, and you choose the colour of the hardware with our guidance.
Precision measurement
The glass is tempered and cannot be cut after manufacturing, so we will measure on site exactly and fabricate the glass panel to millimetre precision.
Fabrication
The glass is cut, edges polished, and heat-treated (tempered) to the specified dimensions, which have been verified in the survey.
Installation
The team installs, levels, and secures the panel by hinges or clamps, or a track system, and applies waterproof silicone seals at panel edges to avoid any leakage.
Final inspection and handover
We inspect the door swing or slide, the seal quality, and overall finish and walk you through some basic maintenance before completing the job.
Caring for Your Shower Partition
- Clean the glass after each shower with a squeegee to avoid water spots caused by minerals in hard water.
- Wipe down monthly with a non-abrasive glass cleaner or a vinegar-water solution to dissolve limescale.
- Never use any abrasive scouring pads that scratch the glass surface over time.
- Ensure silicone seals are inspected regularly (6-12 months) and re-sealed as soon as gaps, discolouration, or mould is observed around the edges.
- A nano-coating means softer cloth and mild soap; don’t use hard chemical cleaners, as they will strip the coating.
Why Choose Space Makeover
Shower partition design and installation is combined with our breadth of knowledge in glass and aluminium fabrication, waterproofing, and interior glazing at Space Makeover. We provide a complimentary site survey before every quote, and our standard materials include tempered safety glass and marine-grade hardware. We work on residential and commercial projects throughout Dubai, Ajman, and the UAE. Whether you’re looking for a partition from a single panel or a complete renovation of the bathroom in a villa, our team is well-versed in designing, manufacturing, and fitting the partition on-site to ensure a precise fit and a lasting finish.
Shower Partitions – Frequently Asked Questions
Glass shower partitions from Space Makeover are custom shower partitions installed from tempered (toughened) safety glass that will create a beautiful, usable bathroom in villas, apartments, and commercial buildings.
Glass shower enclosures are more stylish than a shower curtain or wall, can let in more light in the bathroom, and help create a more open and elegant bathroom.
Yes. They are constructed of tempered safety glass, which is heat-treated to crush into small, blunt pieces when broken, in compliance with the necessary safety standards for wet areas.
No. Are easy to wash, low maintenance, and don’t stain with water or develop mould as easily as fabric shower curtains.
Yes. Each panel can be sized, typed, framed, or finished to fit your bathroom, whether it’s a standard opening or an irregular corner or wet room.
When shower partitions are installed properly and sealed, water splashes will remain inside the shower area, making the rest of the bathroom dry, clean, and safe.
We provide clear, frosted, tinted, and textured glass, as well as a number of unique privacy and design options.
In Dubai and Ajman, the most common glass thickness for a shower partition is 8mm, 10mm, or 12mm. 10mm thick glass is used for walk-in frameless screens, while 8mm thick glass is used for framed or semi-framed walk-in partitions.
Frameless partitions are more expensive because they have thicker glass and high-quality hardware; they are cleaner and more modern-looking, and easier to clean as there are no tracks on the frame to catch dirt. Framed partitions are less expensive but no less functional, for rentals and commercial buildings.
Yes. We erect shower partitions throughout Dubai, Ajman, and other emirates in the UAE for home and business applications.
The best way is a free site survey, as the final cost will vary according to the exact dimensions of the bathroom, thickness of the glass, types of finish, and hardware. Please call Space Makeover for a complimentary estimate.
Space Makeover, a leading supplier of Shower Partition Design and Installation in Dubai, Ajman, and UAE, offers high-quality, personalized shower partition solutions.
Reach Out to Us
Need a shower partition, glass, or aluminium solution in Dubai or Ajman? Contact Space Makeover today for a free site survey and a custom quote.
Visit Us
Warehouse No. 13, Building 144, Jurf Industrial Area No. 3, Al Humaideya Street, Behind Tasheel, Ajman, UAE
Call Now
+971 58 947 4894
+971 55 441 0638
Available 9am – 7pm
Crafting Elegant Space Transformations
Transform your home or workspace with custom aluminium & glass solutions designed for style, strength, and lasting beauty.